Cisco IP Video Phone – Quick Start Guide


00:00 – Introduction
00:29 – Phone Layout & Button Functions
01:36 – Placing a Call
02:28 – Transferring a Call
02:39 – Conference Calls
03:12 – Sending Calls to Voicemail & Forwarding Calls
03:57 – Voicemail
04:36 – Campus Directory
04:55 – Adjusting Settings

Pick up the handset and enter a number. Or, try one of these alternatives.

Make a Video Call

To start video while on a call, open the camera shutter. To stop video while on a call, close the camera shutter.

Redial Last Number

Press Redial to redial on your primary line. To redial on another line, press the line button first.

Dial On-Hook

  1. Enter a number when the phone is idle.
  2. Lift the handset or press Call, Headset , or Speakerphone .

New calls display as a flashing amber line button, an animated icon and caller ID on the screen, and a flashing red light on your handset.

Answer Multiple Lines

If you are talking on the phone when you get another call, a message appears on the phone screen.

  1. Press the flashing amber line button to switch lines.
  2. Press the session button to answer the secondcall and put the first call on hold.
  1. Press Hold . The hold icon appears and the session button flashes green.
  2. To resume a call from hold, press the session button, Resume, or Hold.
  1. From an active call, press Transfer .
  2. Enter the transfer recipient’s phone number.
  3. Press Transfer again (before or after the party answers). The transfer completes.

Direct Transfer

You can transfer the active call to the held call either on the same line or across lines

  • From an active call, press Transfer .
  • Press Active calls to select the held call, and press Transfer again to finish the call transfer.
  1. From an active call, press Conference .
  2. Make a new call.
  3. Press Conference again (before or after the party answers). The conference begins and the phone displays “Conference.”
  4. Repeat these steps to add more participants.

The conference ends when all participants hang up.

Join Calls

You can conference the active call with the held calls either on the same line or across lines.

  • From an active call, press Conference .
  • Press Active calls to select the held call, and press Conference again to create the conference.

View and Remove Participants

During a conference, press Show Details. To remove a participant from the conference, scroll to the participant and press Remove.

  1. While on a call, press Mute . The button glows to indicate that mute is on.
  2. Press Mute again to turn mute off.
  1. Press Forward all.
  2. Enter a phone number, or
  3. To forward all calls to voicemail, press Messages .
  4. To cancel call forwarding, press Forward off.

New message indicators:

  • A solid red light on your handset
  • A stutter dial tone (if available)
  • The voicemail icon and number display on thescreen along with one idle session button

Listen to Messages

Press Messages  and follow the voice prompts. To check messages for a specific line, press the line button first.

Change your PIN

Go to voicemail.wfu.edu and sign in with your WFU credentials.

Navigate to Settings > Password > Change PIN

Press Divert when the call is ringing, active, or on hold.

Divert redirects an individual call to voicemail or to another number set up by your system administrator.

View Call History

  1. Press Applications .
  2. Scroll and select Recents.
  3. Select a line to view. Your phone displays the last 150 missed, placed, and received calls.
  4. To view details for a call, scroll to the call, press More, and then press Details.

View Missed Calls Only

  1. View your call history.
  2. Press Missed. Alternately, press the session button mapped to the Call History icon.

Dial Call History

  1. View your call history, or navigate to your missed or placed calls.
  2. Scroll to a listing and lift the handset, or pressSelect.
  3. To edit a number before dialing, press More > Edit Dial.
  1. Press Contacts .
  2. Scroll and select a directory.
  3. Use your keypad to input search criteria.
  4. Press Submit.
  5. To dial, scroll to a listing and press Dial.

Volume

The Volume bar is located to the left of the keypad .

  • To adjust the handset, headset, or speakerphone volume, press Volume when the phone is in use.
  • To adjust the ringer volume, press Volume on the left (-) or right (+).
  • To silence the phone when ringing, press Volume left one time. Press Volume left (-) multiple times to lower the ringing volume.

Screen Brightness

  1. Press Applications .
  2. Select Settings > Brightness.
  3. Press the Navigation cluster left or right to increase the brightness and press Save.

Font Size

  1. Press Applications .
  2. Select Settings > Font Size.
  3. Select Tiny, Small, Regular, Large, or Huge.
  4. Press Save.

Line and Session Buttons?

Line buttons are located on the left side of the phone screen. Buttons that are not assigned to phone lines can be used for speed-dials and other features. Contact your system administrator for more information.

Note: If you are using a locale that reads right to left, such as Arabic, the line button and session button locations are swapped.

Session buttons are located on the right side of the phone screen.

Softkeys

Four softkey buttons are located below the phone screen. You can press More (when available) to reveal additional softkeys.

List and Menu Navigation

Press up, down, left, or right on the four-way Navigation cluster.

A scroll bar on the screen indicates your relative position within a list.

To select the highlighted item, press Select. Or, use the keypad to enter the corresponding item number.

Exit a Menu

To exit a menu completely, press Exit.

To go back one level in a menu, press Back .

Note: If you press and hold Back, you exit a menu completely.

To charge your mobile phone, use the side USB port of the Cisco IP Phone 8851 or 8851NR, or use the side or back USB port of the Cisco IP Phone 8861 or 8865.

To charge your tablet, use the back USB port of Cisco IP Phone 8861 and 8865.

(Intelligent Proximity is applicable to Cisco IP Phone 8845, 8851, 8861, and 8865; it is not supported by the Cisco IP Phone 8811 or 8851NR.) If your administrator has enabled this feature, you press the second line button to open the Bluetooth menu to pair and connect your smartphone or tablet.

After your smartphone or tablet connects, its name displays on the second line label and you use this line to manage your smartphone or tablet calls. You can also use the Hands-free 2-way audio entry in the Bluetooth menu.

  1. Press Applications .
  2. Select Bluetooth.
  3. Enable or disable Hands-free 2-way audio.

How Can I Keep Track of Multiple Calls?

Line button colors indicate call states and can help you stay oriented when handling multiple calls including shared lines:

  • Ringing call—Flashing amber
  • Connected call—Solid green
  • Held call—Flashing green
  • Shared line in-use remotely—Solid red
  • Shared line on hold remotely—Flashing red

What Is the Best Way to Use My Headset?

If you use a headset to dial or answer a call, your headset is the primary audio path and a headset icon displays in the right corner of the header bar.

Press Answer to automatically answer the call using the headset.

How Do I Set Up Speed Dials?

To set up Speed Dials and customize other features and settings for your phone, use a web browser on your computer to access the Self Care Portal.

 

Need Help?

Contact our Service Desk, conveniently located in the ZSR Library.

Hours